METTLEAIR
316L Stainless Steel Elbow Speed Control Male-Female, METER OUT, 3/8"MBSPP-3/8"FBSPP
316L Stainless Steel Elbow Speed Control Male-Female, METER OUT, 3/8"MBSPP-3/8"FBSPP
SKU: SMFSC-G03
Couldn't load pickup availability
IMPORTANT NOTE:
This FLOW CONTROL is a DIRECTIONAL Valve (METER OUT). Air flow is controlled only in ONE DIRECTION - from Male threaded side to Female threaded side. In the opposite direction air flow is UNCONTROLLED.
"Pipe Thread Size" DOES NOT directly correspond to Actual Dimensions of the thread.
No Freeze Warning: Expansion of freezing fluid(s) inside fitting will cause fitting to fail and rupture
Description
Category: Stainless Steel Push to Connect Fittings
Type: 90° Male-Female Elbow Speed Control
Model: SMFSC-G03
Body Material: Stainless Steel 316L
Thread 1: 3/8" BSPP (G)
Thread 2: 3/8" BSPP (G)
Disclaimer: This valve is NOT intended and cannot be used as a shut off point / shut off valve. It is designed to control flow rate only.
Specifications
- Fluid Compatibility: Air, Water, Steam
- Operating Pressure: 0 to 215 PSI
- Working Temperature Range: -4°F to 284°F (-20°C to 140°C)
- Body Material: Stainless Steel 316L
- O-Ring & Packing Material: FKM (Viton®)
- Back Ring: Stainless Steel 316L
- Lock Claws: Stainless Steel
- Collar: Stainless Steel 316L
- Sleeve: Stainless Steel 316L
Features
- Compatible Tubing: Suitable for Polyurethane and Nylon tubing
- Quick Connections: Enables fast, secure, and leak-free connections
- Reusable Design: Allows multiple connections and disconnections without compromising performance
- Metallic Body: Constructed from Stainless Steel 316L for dependable performance
-
High-Performance Seals: FKM (Viton®) seals ensure excellent resistance to heat and chemicals
CALIFORNIA PROPOSITION 65 WARNING
CALIFORNIA PROPOSITION 65 WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
WARNING THIS PRODUCT IS NOT D.O.T. APPROVED
WARNING THIS PRODUCT IS NOT D.O.T. APPROVED
This product is not D.O.T. (Department of Transportation) approved and should not be used for automotive applications.
GENERIC IMAGES ARE USED FOR OUR WEBSITE
GENERIC IMAGES ARE USED FOR OUR WEBSITE
The actual product may differ from the image shown in size, shape and appearance.
Fitment is based on the measurements given in the product description.
LIMITATION OF LIABILITY
LIMITATION OF LIABILITY
IN NO EVENT SHALL METTLEAIR BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE DAMAGES OF ANY KIND, OR DAMAGES CAUSED BY DELAY IN PERFORMANCE, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR REVENUE, COST OF SUBSTITUTES, ARISING FROM OR IN ANY WAY CONNECTED TO THIS AGREEMENT OR ORDER, WHETHER FOR BREACH OF WARRANTY OR OTHER BREACH OF CONTRACT, NEGLIGENCE OR OTHER TORT. METTLEAIR®’S MAXIMUM LIABILITY FOR ANY CLAIMS ARISING FROM OR IN ANY WAY CONNECTED TO THIS AGREEMENT OR ORDER, WHETHER IN CONTRACT OR TORT OR OTHERWISE, SHALL NOT EXCEED THE INVOICED PURCHASE PRICE OF THE PRODUCT(S) GIVING RISE TO THE CLAIM.
It is agreed and acknowledged that the provisions of these Terms allocate the risks between MettleAir® and the Buyer in a fair and equitable manner, MettleAir®’s pricing reflects this allocation of risk, and but for this allocation and limitation of liability, MettleAir® would not have agreed to sell the Products to Buyer.
In jurisdictions that limit the scope of, or preclude limitations or exclusions of, remedies or damages or of liability such as liability for gross negligence or willful misconduct or do not allow implied warranties to be excluded, the limitation or exclusion of warranties, remedies, damages or liability set forth herein are intended to apply to the maximum extent permitted by applicable law.
